Low/no water collection, can smell first crack
Tools Required :
- Philips #2 Screwdriver
- Metric allen key set
- Roaster Soakz
- Hot water source
Process :
- Power down Roaster, unplug ethernet and power cable, remove the rear skin with #2 phillips screwdriver.
- Use a 6mm allen screwdriver to open up the rear extrusion. Swing the panel out and open. Place the bracket and screw aside.
- Remove the silicone hose between the heat exchange and the roaster stack
- Run hot water and cleaner through the hose
- Check and clean the fittings on the roaster side and heat exchange side
- Remove elbow fittings as necessary if heavy cleaning is required.
![PXL_20240405_173256230](https://help.bellwethercoffee.com/hs-fs/hubfs/PXL_20240405_173256230.jpg?width=688&height=518&name=PXL_20240405_173256230.jpg)
![PXL_20240405_174143237](https://help.bellwethercoffee.com/hs-fs/hubfs/PXL_20240405_174143237.jpg?width=296&height=394&name=PXL_20240405_174143237.jpg)
![PXL_20240405_174130555](https://help.bellwethercoffee.com/hs-fs/hubfs/PXL_20240405_174130555.jpg?width=296&height=393&name=PXL_20240405_174130555.jpg)
![PXL_20240814_171609126](https://help.bellwethercoffee.com/hs-fs/hubfs/PXL_20240814_171609126.jpg?width=292&height=518&name=PXL_20240814_171609126.jpg)
![PXL_20240814_171616236](https://help.bellwethercoffee.com/hs-fs/hubfs/PXL_20240814_171616236.jpg?width=293&height=521&name=PXL_20240814_171616236.jpg)