Help Center

Back to home

Help Center

Series 2 | Operation and Maintenance

Series 2 | Operation and Maintenance

How to operate and maintain your Bellwether Series 2

Series 2 : Securing contactor power wires

Replacing Pneumatic Fittings

Repair Instructions

Series 2: Changing phase configuration

Series 2: Reversing Order of HEPA and Carbon Filter

Series 2: Upgrading Chaff Can Assembly

Series 2: Replacing The Asrock

Series 2: Securing insulation

Series 2: Replacing the Bean Load oring

Series 2: Replacing Rear Bearing Internals

Series 2: Cleaning the Bean Drop Slide

Series 2 : Replacing Hopper Release Solenoid

Series 2: Adjusting the Bean load sensor

Series 2 : Replacing the Catalyst Thermocouple

Series 2 : Replacing Bean Cooler TC

Series 2 : Replacing the bypass motor

Series 2 : Adjusting Bean Exit Mechanical Switch

See more

Roaster Operations

Starting A Roast

Series 2: Installation Checklist (04/24)

Most Common Issues with Series 2

Preventative Maintenance

Series 2: Adjusting The Bean Front Probe

Series 2: Adjusting the Bean Drop Closed sensor

Series 2 Roaster Maintenance Tasks

Series 2 Daily Maintenance Tasks

Series 2: Aligning The Bean Exit Arms

Series 2: Replacing Exhaust Fan

Series 2: PM Checklist (09/2024)

Series 2: Cleaning The Door Glass

Series 2: Cleaning the steam collection tube

Series 2: Cleaning The Extrusion

Series 2: Replacing The Exhaust Fan (Short Wire)

See more

Diagrams | Mechanical & Wiring

Series 2 Hardware + Software Overview

Understanding Tech Panel

Series 2: Accessing and Testing on the Tech Panel

Series 2: Reading and understanding the Alarms

Series 2: Log output variables