![3_BellwetherLogo-2.png]](https://help.bellwethercoffee.com/hs-fs/hubfs/3_BellwetherLogo-2.png?height=40&name=3_BellwetherLogo-2.png){kind=small}
Series 2 | Operation and Maintenance
How to operate and maintain your Bellwether Series 2
Repair Instructions
- Series 2: Changing phase configuration
- Series 2: Reversing Order of HEPA and Carbon Filter
- Series 2: Upgrading Chaff Can Assembly
- Series 2: Replacing The Asrock
- Series 2: Securing insulation
- Series 2: Replacing the Bean Load oring
- Series 2: Replacing Rear Bearing Internals
- Series 2: Cleaning the Bean Drop Slide
- Series 2 : Replacing Hopper Release Solenoid
- Series 2: Adjusting the Bean load sensor
- Series 2 : Replacing the Catalyst Thermocouple
- Series 2 : Replacing Bean Cooler TC
- Series 2 : Replacing the bypass motor
- Series 2 : Adjusting Bean Exit Mechanical Switch
- Series 2 : Replacing the Blower Thermocouple
Roaster Operations
Preventative Maintenance
- Series 2: Adjusting The Bean Front Probe
- Series 2: Adjusting the Bean Drop Closed sensor
- Series 2 Roaster Maintenance Tasks
- Series 2 Daily Maintenance Tasks
- Series 2: Aligning The Bean Exit Arms
- Series 2: Replacing Exhaust Fan
- Series 2: PM Checklist (09/2024)
- Series 2: Cleaning The Door Glass
- Series 2: Cleaning the steam collection tube
- Series 2: Cleaning The Extrusion
- Series 2: Replacing The Exhaust Fan (Short Wire)