1. Remove bean bucket cubby by removing the 4 screws on the right and left side of the cubby. When sliding out the cubby be mindful of the bean bucket detect switch which is plugged in at the back of the cubby.
2. Disconnect the pneumatic tubes at the black plastic T's located on the right side of the cooling tray. Disconnect any wiring harness tied to the cooling tray.
3. Using the 4 thumb screws located at the top of the cooling tray on the right and left of the drum, lower the cooling tray to expose the bean cooler TC.
4. Replace the bean cooler TC.
5. Reverse steps 3 - 1.